VolkkariHuolto Logo
Back to Services
Volkswagen Regular Maintenance in Espoo

Volkswagen Regular Maintenance in Espoo

Volkswagen cars are modern and stylish vehicles known for their excellent quality, reliability, and thoughtful safety systems. Although these reliable vehicles have an excellent reputation, they require regular scheduled maintenance, which is performed as scheduled service, and you can get the best technical service for Volkswagen at our service centers.

What does scheduled maintenance include?

Scheduled maintenance includes work performed by Volkkarihuolto service center specialists:

Inspection for possible faults
Regular maintenance of Volkswagen cars
Replacement of parts with original spare parts and quality originals
Installation of accessories and new interior equipment when necessary

It is not necessary to turn to service only in case of breakdown or scheduled maintenance, since the main task of Volkswagen and any other car service is preventive maintenance and keeping the car in excellent condition, which also affects travel comfort.

It is important to note that in continuous city driving, the service interval should be shortened to 8,000–10,000 kilometers, because in city driving the average speed is very low and oil loses its properties earlier. Practical experience shows that if oil is changed every 15,000 kilometers in city use, the engine may develop oil consumption over time that cannot be corrected without engine disassembly.

Service Schedule

Standard inspections are planned every 15,000 km and proceed by numbers:

1
Scheduled maintenance 1 — 15,000 km
2
Scheduled maintenance 2 — 30,000 km
3
Scheduled maintenance 3 — 45,000 km
4
Scheduled maintenance 4 — 60,000 km
5
Scheduled maintenance 5 — 75,000 km
6
Scheduled maintenance 6 — 90,000 km
7
Scheduled maintenance 7 — 105,000 km
8
Scheduled maintenance 8 — 120,000 km
9
Scheduled maintenance 9 — 135,000 km
10
Scheduled maintenance 10 — 150,000 km

What services are performed during scheduled maintenance?

It should be noted that scheduled maintenance is not limited to just changing engine oil, but also includes many other jobs that depend on the car model, engine type and volume, mileage, and additional equipment.

Engine oil and oil filter change
Air filter replacement
Cabin air filter replacement
Fuel filter replacement
Transmission oil change
Spark plugs or glow plugs replacement
Timing belt and multi-ribbed belt replacement
Brake fluid change
Chassis and brake inspection
Reading error codes of all systems
Emission inspection
Other works and inspections taking into account manufacturer regulations

Our Service Center Advantages

Today, finding an affordable auto repair shop where you can perform scheduled maintenance on your car is quite easy, but only a few offer quality services. We offer quality service for Volkswagen Transporter and other German brand minivans, sedans, and crossovers.

Professionalism and highest service quality

Years of experience and continuous training

Up-to-date installed software

We follow technology development

Warranty on work performed and replaced parts

Clear pricing policy

Quality Assurance

When you turn to us, you can be sure of the quality of work, as we use original spare parts and original-level materials when servicing Volkswagen Jetta and other cars from this manufacturer.

Volkswagen Service in Espoo

Professional car service in Espoo. Book an appointment easily online or call us.

Call UsFind us

Did you know?

VAG owns one of the largest collections of automotive platforms in the world — many models from different brands are built on a common base (like MQB).

Our Works

Examples of car service and repair work we have completed

Filters

Volkswagen New Beetle 2006 Transmission Oil Pan Straightening and Oil + Filter Change

Volkswagen New Beetle 2006 Transmission Oil Pan Straightening and Oil + Filter Change

Volkswagen New BeetleTransmission oil pan straightening and oil + filter change26.08.2026

The customer brought a 2006 Volkswagen New Beetle whose automatic transmission oil pan had been struck and dented. With the car on a lift, we confirmed the pan damage and found old, contaminated transmission fluid. The oil pan was removed, the magnet and used fluid were inspected, and the transmission filter was replaced. The dented pan was straightened, refitted with a proper seal, and the gearbox was filled with fresh oil. We performed the following procedures: - Inspection and removal of the transmission oil pan - Draining and assessing the old transmission oil - Checking the magnet and metal debris - Replacing the transmission oil filter - Straightening the oil pan - Refitting the pan and renewing the seals - Filling with new transmission oil and checking the level After the service, the oil pan is back in the correct shape, the oil and filter have been renewed, and the transmission is ready for safe use.

Open case
Audi S5 2007 Wash and Protective Coating

Audi S5 2007 Wash and Protective Coating

Audi S5Wash and protective coating26.08.2026

The customer brought a 2007 Audi S5 to our workshop for a car wash and protective coating. The silver S5 coupe was carefully cleaned in our wash bay with a pressure washer so the body, wheels and visible surfaces were ready before coating. We performed the following procedures: - Thorough exterior wash - Cleaning of wheels and wheel arches - Body preparation for protective coating - Application of protective coating to the paintwork After washing and coating, the car is clean, glossy and better protected against weather, dirt and road salt.

Open case
SEAT León 2017 1.4 TSI Scheduled Maintenance

SEAT León 2017 1.4 TSI Scheduled Maintenance

SEAT León 1.4 TSIScheduled maintenance25.08.2026

The customer brought a 2017 SEAT León 1.4 TSI to our workshop for scheduled maintenance. The car was raised on a lift so the engine oil and filter change, as well as an underbody inspection, could be carried out thoroughly. We performed the following procedures: - Draining the old engine oil - Replacing the oil filter - Refilling with fresh oil to manufacturer specification - Visual inspection of the chassis, suspension and possible leaks - Checking fluid levels - Reading fault codes and basic system diagnostics After the service, the car is ready for safe driving. Regular scheduled maintenance keeps the 1.4 TSI engine reliable and helps prevent more expensive repairs.

Open case
Audi S5 Cabriolet 2011 Convertible Roof System Repair

Audi S5 Cabriolet 2011 Convertible Roof System Repair

Audi S5 CabrioletConvertible roof system repair29.06.2026

The customer brought us a 2011 Audi S5 Cabriolet with a fault in the convertible roof system. A sensor in the roof system had failed, causing the roof to lift and get stuck in the wrong position, while the mechanism could no longer complete the opening or closing cycle correctly. This type of fault requires careful diagnostics, because several sensors, limit switches and control units work together in a convertible roof mechanism. We checked fault codes, roof position recognition and the movement of the mechanism so the roof could be safely released from the incorrect position without causing additional damage. We performed the following procedures: - Convertible roof system diagnostics with a tester - Faulty sensor location - Releasing the roof mechanism from the incorrect position - Sensor and wiring inspection - System testing through several opening and closing cycles After the repair, the convertible roof works correctly again: the roof opens and closes normally, and no active fault codes remained in the system. The vehicle was returned to the customer with a working and safely tested roof mechanism.

Open case
Volkswagen Passat 1.4 GTE Hybrid 2016 Turbo Replacement

Volkswagen Passat 1.4 GTE Hybrid 2016 Turbo Replacement

Volkswagen Passat 1.4 GTE HybridTurbo replacement

The customer brought us a 2016 Volkswagen Passat 1.4 GTE Hybrid after symptoms pointing to an oil leak started to appear in the engine operation. During diagnostics, we found that the turbo shaft seal was damaged and the turbo had started leaking oil into the intake manifold. This kind of fault should be repaired in time, because oil entering the intake side can cause rough running, smoke, and in the worst case further engine damage. We removed the necessary components, inspected the intake system, and replaced the damaged turbo with a new unit. After the repair, we checked the system for leaks, verified oil tightness, and tested engine operation. The car was returned to the customer in good working condition, with the risk caused by the turbo oil leak eliminated.

Open case
Audi S5 3.0TFSI Timing Chain Repair

Audi S5 3.0TFSI Timing Chain Repair

Audi S5 3.0TFSITiming chain repair10.05.2026

The customer brought an Audi S5 3.0TFSI to our workshop with a distinct metallic rattling noise from the front of the engine on cold start and at idle. Fault codes indicated camshaft position correlation errors — a classic symptom of a stretched timing chain and worn chain guides on the 3.0TFSI engines. Diagnostics revealed the following issues: - Stretched primary timing chain - Worn chain guides and tensioner - Camshaft position correlation fault codes - Metallic rattling noise from the front of the engine We performed a complete timing chain repair: - Disassembly of the front of the engine and accessories - Removal of old timing chain, guides and tensioner - Installation of new genuine parts (chain, guides, tensioner, sprockets) - Precise timing setup using special tools - Replacement of seals and engine oil - ECU basic settings and adaptation - Test drive and final fault code check After the repair, the engine starts cleanly, idle is smooth, and all abnormal noises have disappeared. The timely timing chain repair saved the customer from a significantly more expensive engine overhaul.

Open case

Service Process

How Volkkarihuolto service works for Audi, Volkswagen, Skoda, Seat, and Cupra vehicles

Booking

Book , by phone, or email. Provide your vehicle details and service needs.

Vehicle Reception

Upon arrival, our specialist will receive your car, discuss the service needs, and perform an initial inspection.

Diagnostics

We use original Audi diagnostic equipment and thoroughly check your vehicle to identify any potential issues.

Service Plan

If we find unexpected issues, we will contact you and propose a repair plan with a cost estimate before proceeding with the work.

Service Work

Our professional team performs all necessary service work using original or OEM-approved parts.

Quality Control

An experienced technician checks all work performed and ensures your vehicle operates flawlessly.

Vehicle Handover

We will notify you when your vehicle is ready for collection. We will explain all the work done and answer your questions.

Сначала примите согласие на cookies