VolkkariHuolto Logo
Back to works

Volkswagen Crafter motorhome 2019 2.0TDI service and diagnostics

Car: Volkswagen Crafter matkailuautoWork type: Motorhome serviceDate: 23.07.2025

Comprehensive service and diagnostics of a 2019 Volkswagen Crafter 2.0TDI motorhome. The customer brought their motorhome for scheduled maintenance after a long journey.

We performed the following procedures:

- Complete engine diagnostics - Oil change and filter replacement - Brake system inspection and service - Suspension and steering inspection - Air conditioning system service - Electrical systems testing - Exhaust emission measurements

Motorhome servicing requires special attention due to their greater weight and specific requirements. After the service, the vehicle is ready for new adventures safely.

Work photos

Volkswagen Crafter motorhome 2019 2.0TDI service and diagnostics 1

Our Works

Examples of car service and repair work we have completed

Filters

Volkswagen Passat 1.4 GTE Hybrid 2016 Turbo Replacement

Volkswagen Passat 1.4 GTE Hybrid 2016 Turbo Replacement

Volkswagen Passat 1.4 GTE HybridTurbo replacement

The customer brought us a 2016 Volkswagen Passat 1.4 GTE Hybrid after symptoms pointing to an oil leak started to appear in the engine operation. During diagnostics, we found that the turbo shaft seal was damaged and the turbo had started leaking oil into the intake manifold. This kind of fault should be repaired in time, because oil entering the intake side can cause rough running, smoke, and in the worst case further engine damage. We removed the necessary components, inspected the intake system, and replaced the damaged turbo with a new unit. After the repair, we checked the system for leaks, verified oil tightness, and tested engine operation. The car was returned to the customer in good working condition, with the risk caused by the turbo oil leak eliminated.

Open case
Audi S5 3.0TFSI Timing Chain Repair

Audi S5 3.0TFSI Timing Chain Repair

Audi S5 3.0TFSITiming chain repair10.05.2026

The customer brought an Audi S5 3.0TFSI to our workshop with a distinct metallic rattling noise from the front of the engine on cold start and at idle. Fault codes indicated camshaft position correlation errors — a classic symptom of a stretched timing chain and worn chain guides on the 3.0TFSI engines. Diagnostics revealed the following issues: - Stretched primary timing chain - Worn chain guides and tensioner - Camshaft position correlation fault codes - Metallic rattling noise from the front of the engine We performed a complete timing chain repair: - Disassembly of the front of the engine and accessories - Removal of old timing chain, guides and tensioner - Installation of new genuine parts (chain, guides, tensioner, sprockets) - Precise timing setup using special tools - Replacement of seals and engine oil - ECU basic settings and adaptation - Test drive and final fault code check After the repair, the engine starts cleanly, idle is smooth, and all abnormal noises have disappeared. The timely timing chain repair saved the customer from a significantly more expensive engine overhaul.

Open case
Broken injector diagnostic for Audi Q7 3.0TDi V6 2012

Broken injector diagnostic for Audi Q7 3.0TDi V6 2012

Audi Q7 3.0TDi V6Injector diagnostics20.01.2025

Diagnostic of a broken injector for a 2012 Audi Q7 3.0TDi V6. The customer came to our workshop with unusual engine behavior: engine jerking, power loss, and unusual noises. Our diagnostics revealed the following issues: - One injector was not working properly - Uneven engine operation - Power loss and increased fuel consumption - Possible error codes in the engine control unit We performed the following procedures: - Precise diagnostics using the engine control unit - Testing of injector operation - Fuel pressure measurement - Checking electrical signals of injectors - Fault determination and repair recommendations After diagnostics, the customer received a clear picture of the problem and repair recommendations. The broken injector requires replacement, which will restore the engine's original performance.

Open case
Volkswagen Passat 2009 1.4TSi CNG Suspension Repair

Volkswagen Passat 2009 1.4TSi CNG Suspension Repair

Volkswagen Passat 1.4TSi CNGSuspension repair15.01.2025

Comprehensive suspension repair for a 2009 Volkswagen Passat 1.4TSi CNG. The customer came to our workshop with uneven ride and unusual suspension noise issues. Diagnostics revealed several suspension problems: - Worn front suspension components (springs, shock absorbers, stabilizer bars) - Damaged rear suspension components - Steering wheel wear and unevenness - Brake system inspection and service We performed the following procedures: - Complete front suspension replacement - Rear suspension repair and parts replacement - Steering wheel balancing and adjustment - Brake system service - Suspension geometry adjustment - Test drive and testing After the repair, the car now rides smoothly, the suspension is softer, and handling has improved significantly. The CNG system continues to work flawlessly.

Open case
Škoda Yeti 1.6 TDI DQ250 Clutch and Flywheel Replacement

Škoda Yeti 1.6 TDI DQ250 Clutch and Flywheel Replacement

Skoda Yeti 1.6 TDIClutch and flywheel replacement10.01.2025

Complete replacement of DQ250 DSG clutch and flywheel on a 2014 Škoda Yeti 1.6 TDI. The customer came to our workshop when the clutch started slipping and unusual noises were heard from the transmission. Diagnostics showed complete wear of the clutch and flywheel. The DQ250 transmission is known for these issues, so the procedure was necessary. We performed the following work: - Transmission removal and disassembly - Inspection and removal of old clutch and flywheel - Installation of new dual clutch - Replacement of flywheel with new one - Transmission oil change - System adaptation and testing After the repair, the transmission works flawlessly, shifting is smooth, and all unusual noises have disappeared. The new clutch ensures long-term and reliable operation.

Open case
Replacement of seals and solenoids DQ400 GTe Passat 2022

Replacement of seals and solenoids DQ400 GTe Passat 2022

Volkswagen Passat GTETransmission repair20.03.2025

Repair of the DSG transmission on a 2022 Volkswagen Passat GTE, including replacement of all seals and solenoids. The customer came to the service with an issue of jerking when changing gears and delays in gear engagement. Diagnostics revealed a hydraulic problem in the DQ400 transmission caused by worn solenoids and leaking seals. We performed the following procedures: - Transmission fluid replacement and analysis - Transmission electronics diagnostics - Partial disassembly of the transmission - Replacement of all solenoids with new ones - Complete replacement of all seals - System adaptation and calibration After the repair, the transmission works like new, with precise and smooth gear changes.

Open case

Service Process

How Volkkarihuolto service works for Audi, Volkswagen, Skoda, Seat, and Cupra vehicles

Booking

Book , by phone, or email. Provide your vehicle details and service needs.

Vehicle Reception

Upon arrival, our specialist will receive your car, discuss the service needs, and perform an initial inspection.

Diagnostics

We use original Audi diagnostic equipment and thoroughly check your vehicle to identify any potential issues.

Service Plan

If we find unexpected issues, we will contact you and propose a repair plan with a cost estimate before proceeding with the work.

Service Work

Our professional team performs all necessary service work using original or OEM-approved parts.

Quality Control

An experienced technician checks all work performed and ensures your vehicle operates flawlessly.

Vehicle Handover

We will notify you when your vehicle is ready for collection. We will explain all the work done and answer your questions.

Сначала примите согласие на cookies