Audi VW Škoda SEAT Service Espoo | Volkkarihuolto
VolkkariHuolto Logo
Bitumen removal

Engine Cleaning in Espoo

Engine cleaning is not just an aesthetic procedure, but an important part of car maintenance. In urban use, especially in Finland, where the engine compartment is exposed to dirt, moisture and road salts throughout the year, regular engine cleaning helps maintain its condition and extend its service life.

At Volkkarihuolto car service in Espoo, we offer professional engine cleaning. Our specialists use specialized cleaning agents and techniques that safely clean the engine without damaging electrical systems.

Why clean the engine?

Engine cleaning is a comprehensive procedure that solves several important tasks:

  • Reducing overheating risk: dirt, dust and oil accumulated on the engine surface interfere with its normal cooling. This increases the likelihood of overheating, especially in summer or traffic jams. A clean engine dissipates heat better and operates more stably.
  • Protecting electrical systems: oil deposits and moisture in the engine compartment can damage electrical connections, cause sensor malfunctions and even trigger short circuits. Timely engine cleaning helps avoid such problems.
  • Facilitating diagnostics and repair: it's harder to detect oil leaks, coolant leaks or other malfunctions on a dirty engine. A clean engine simplifies maintenance and makes diagnostics more accurate.
  • Increasing car value: a car with a well-maintained, clean engine makes a better impression when selling. A visually well-maintained engine compartment increases trust in the car and speeds up the transaction.

How is engine cleaning performed?

1

Initial diagnosis

Specialists assess the engine condition and degree of contamination, determine the required scope of work.

2

Component protection

Sensitive engine elements and electrical equipment are protected with special materials.

3

Gentle cleaning

Specialized cleaning agents are used, safe for all types of engines and electrical systems.

4

Drying

After cleaning, the engine is thoroughly dried, protective compounds are applied if necessary.

5

Deep cleaning

In case of heavy contamination, deeper cleaning is performed with removal of protective elements.

6

Final inspection

Cleaning quality, electrical system condition and connection tightness are checked.

Cleaning frequency

Engine cleaning is recommended at least once a year, especially after winter. In some cases, such as when preparing for sale or after difficult operating conditions, it should be done earlier.

  • Regular cleaning — once a year
  • After winter season
  • When preparing for sale
  • After difficult operating conditions
  • When detecting leaks or contamination

Car Wash Service in Espoo

Professional car service in Espoo. Book an appointment easily online or call us.

Did you know?

VAG owns one of the largest collections of automotive platforms in the world — many models from different brands are built on a common base (like MQB).

Car Brands

We wash a wide range of car brands, including:

Volkswagen
Audi
Skoda
Seat
Cupra
BMW
Mercedes-Benz
Opel
Peugeot
Citroën
Renault
Volvo
Fiat
Dacia
Mini
Porsche
Jaguar
Land Rover
Toyota
Lexus
Nissan
Honda
Mazda
Mitsubishi
Suzuki
Subaru
Hyundai
Kia
Genesis
Ford
Chevrolet
Tesla
Jeep
Dodge
RAM
Polestar
BYD
NIO
MG
and others

We are an independent auto repair shop and are not affiliated with any of the brands listed

Our Works

Examples of car service and repair work we have completed

Filters

Broken injector diagnostic for Audi Q7 3.0TDi V6 2012

Broken injector diagnostic for Audi Q7 3.0TDi V6 2012

Audi Q7 3.0TDi V6Injector diagnostics20.01.2025

Diagnostic of a broken injector for a 2012 Audi Q7 3.0TDi V6. The customer came to our workshop with unusual engine behavior: engine jerking, power loss, and unusual noises. Our diagnostics revealed the following issues: - One injector was not working properly - Uneven engine operation - Power loss and increased fuel consumption - Possible error codes in the engine control unit We performed the following procedures: - Precise diagnostics using the engine control unit - Testing of injector operation - Fuel pressure measurement - Checking electrical signals of injectors - Fault determination and repair recommendations After diagnostics, the customer received a clear picture of the problem and repair recommendations. The broken injector requires replacement, which will restore the engine's original performance.

Volkswagen Passat 2009 1.4TSi CNG Suspension Repair

Volkswagen Passat 2009 1.4TSi CNG Suspension Repair

Volkswagen Passat 1.4TSi CNGSuspension repair15.01.2025

Comprehensive suspension repair for a 2009 Volkswagen Passat 1.4TSi CNG. The customer came to our workshop with uneven ride and unusual suspension noise issues. Diagnostics revealed several suspension problems: - Worn front suspension components (springs, shock absorbers, stabilizer bars) - Damaged rear suspension components - Steering wheel wear and unevenness - Brake system inspection and service We performed the following procedures: - Complete front suspension replacement - Rear suspension repair and parts replacement - Steering wheel balancing and adjustment - Brake system service - Suspension geometry adjustment - Test drive and testing After the repair, the car now rides smoothly, the suspension is softer, and handling has improved significantly. The CNG system continues to work flawlessly.

Škoda Yeti 1.6 TDI DQ250 Clutch and Flywheel Replacement

Škoda Yeti 1.6 TDI DQ250 Clutch and Flywheel Replacement

Skoda Yeti 1.6 TDIClutch and flywheel replacement10.01.2025

Complete replacement of DQ250 DSG clutch and flywheel on a 2014 Škoda Yeti 1.6 TDI. The customer came to our workshop when the clutch started slipping and unusual noises were heard from the transmission. Diagnostics showed complete wear of the clutch and flywheel. The DQ250 transmission is known for these issues, so the procedure was necessary. We performed the following work: - Transmission removal and disassembly - Inspection and removal of old clutch and flywheel - Installation of new dual clutch - Replacement of flywheel with new one - Transmission oil change - System adaptation and testing After the repair, the transmission works flawlessly, shifting is smooth, and all unusual noises have disappeared. The new clutch ensures long-term and reliable operation.

Replacement of seals and solenoids DQ400 GTe Passat 2022

Replacement of seals and solenoids DQ400 GTe Passat 2022

Volkswagen Passat GTETransmission repair20.03.2025

Repair of the DSG transmission on a 2022 Volkswagen Passat GTE, including replacement of all seals and solenoids. The customer came to the service with an issue of jerking when changing gears and delays in gear engagement. Diagnostics revealed a hydraulic problem in the DQ400 transmission caused by worn solenoids and leaking seals. We performed the following procedures: - Transmission fluid replacement and analysis - Transmission electronics diagnostics - Partial disassembly of the transmission - Replacement of all solenoids with new ones - Complete replacement of all seals - System adaptation and calibration After the repair, the transmission works like new, with precise and smooth gear changes.

Volkswagen Passat 1.4 GTE Mechatronics Repair

Volkswagen Passat 1.4 GTE Mechatronics Repair

Volkswagen Passat 1.4 GTEMechatronics repair15.05.2025

Complete repair of the mechatronics unit for a 2023 Volkswagen Passat 1.4 GTE. The customer came to our workshop after the car stopped shifting gears correctly and the transmission went into fail-safe mode. Diagnostics revealed a faulty mechatronics unit. We performed the following procedures: - Transmission removal and disassembly - Mechatronics unit extraction and complete restoration - Electronics update and reprogramming - Transmission reassembly and installation - Complete system testing and adaptation After the repair, the transmission works flawlessly, gear shifts are smooth, and error messages have disappeared. The hybrid system now interacts optimally with the transmission.

Audi A5 2.0TFSi Timing Chain Replacement

Audi A5 2.0TFSi Timing Chain Replacement

Audi A5 2.0TFSiTiming system repair28.04.2025

A customer brought in an Audi A5 2.0TFSi model with an abnormal noise coming from the front part of the engine. Our diagnostics revealed a stretched timing chain, which is a common issue in this type of engine. A stretched timing chain can lead to serious engine damage, so immediate intervention was necessary. We performed a complete replacement of the timing chain and guides. The process required partial disassembly of the front of the engine, inspection of the chain and all related components, and replacement of damaged parts. After the work, the engine now runs perfectly without any excess noise. The timely service saved the customer from a potentially costly engine repair in the future.

Service Process

How Volkkarihuolto service works for Audi, Volkswagen, Skoda, Seat, and Cupra vehicles

Booking

Book , by phone, or email. Provide your vehicle details and service needs.

Vehicle Reception

Upon arrival, our specialist will receive your car, discuss the service needs, and perform an initial inspection.

Diagnostics

We use original Audi diagnostic equipment and thoroughly check your vehicle to identify any potential issues.

Service Plan

If we find unexpected issues, we will contact you and propose a repair plan with a cost estimate before proceeding with the work.

Service Work

Our professional team performs all necessary service work using original or OEM-approved parts.

Quality Control

An experienced technician checks all work performed and ensures your vehicle operates flawlessly.

Vehicle Handover

We will notify you when your vehicle is ready for collection. We will explain all the work done and answer your questions.

Сначала примите согласие на cookies